Brigadoon - An Occasional Corner on the Internet
IP Sky Camera Setup (Continued)
Designed by Mark Little
 
Next
Previous
 
As you can see from the display above, this interface can be used to set the display resolution, the Frame Rate, the Mode, Brightness and Contrast. For this camera, the functions such as Zoom and Focus are not relevant. To set the camera up further, select the button with the crossed spanners on the bottom left of the display.
This is the main control panel for setting up the Sricam parameters to use it as a Sky Camera.

NOTE: If you wish to control the infrared LEDs, you should start with the "ActiveX Mode" option. You will not be able to see the image, but an extra button will appear below the "focus" slider where the is a blank in the image above. This button enables or disables the infrared LEDs from coming on when the light level drops.